Prime Contractor: Jacob Construction & Design, Inc.
Contract Number: N62473-11-G-0055
Contract Value: $72,789.00
Contract Award Date: 12/11/2013
Final Completion Date: 12/24/2013
Agency: NAVFAC SOUTHWEST, Lemoore FEAD, Lemoore, CA
JCD installed new conduit on the runway and installed new Primary High Voltage Conductors, Isolation Transformers and Primary Kit Connectors complete and ready for flight line operations.
Jacob Construction & Design, Inc. installed, by Horizontally Boring and Jetting, a new 1-inch Non-Metallic Conduit between the Runway Edge Pull Box and Light Can No. 3 at Touch Down Zone Light Rows 6, 7, 12, and 16, and installed new Primary High Voltage Conductors, Isolation Transformers and Primary Kit Connectors complete and ready for use at Light Cans No. 2 and 3 at each of the 4 Rows. JCD was tasked to perform this project under a tight schedule while carefully refraining from obstructing the active runway operations.
This project involved
- Quality Control management
- Safety management
- Traffic control program and management
- Environmental management including FOD/Dust mitigation and erosion control
- Horizontal Boring
- Adhering to FAA standards/Requirements
- Working with Flight Tower
This project has received a lot of attention from the Public Works Officer, CDR Norton, as well as the NASL Commanding Officer. Your quick response to the effecting repairs is appreciated and reflects well on you and your company.
~David M. Briggs_Supervisory C/O FEAD NASL